VanEx Fire Systems
10447 S. Harold Dr.
Luna Pier, MI 48157
Remove any one
of the four elements
and fire can't burn!
CO2 provides 3-dimensional penetration of a fire, smothering it in seconds.
CO2 does not damage equipment so even sensitive electronics are not harmed when a discharge occurs.
CO2 requires little or no clean-up after a discharge. Simply ventilate the area and your operation can be up-and-running quickly with as little down time as possible.
HIGH PRESSURE CO2
Stored in cylinders at room temperature, high pressure CO2 is extremely versatile. As a stand-alone system, it can be located in a rack near any hazard. It can also use a series of selector valves to protect numerous hazards at once.
Most high pressure systems have a reserve bank of cylinders so that after a discharge you can simply flip a switch and you are ready to continue your operation with full fire protection.
Chemetron High Pressure
Low pressure CO2 can be more economical and easier to maintain than numerous high pressure systems. The tank can be located outside a building and can be piped to any number of hazards. It is very versatile when you need to expand or change your fire hazards.
Chemetron Low Pressure
FM-200 is safe for occupied spaces. It puts out the fire without any harm to occupants of a room.
FM-200 requires very little floor space as compared to other types of clean agents.
FM-200 extinguishes fires by physically removing the heat from the flame. There are NO particles or oily residues produced that could damage sensitive equipment.
FM-200 requires no clean-up after a discharge. Simply ventilate the area and your operation can be up-and-running quickly with as little down time as possible.
In these situations, it's important that fires be knocked down quickly - before they have a chance to spread - and that sensitive electronics and other equipment NOT be damaged in the process of putting out the fire.
Unmatched by any other halogenated agent, 3M™ Novec™ 1230 Fire Protection Fluid is today's long-term solution for protecting high value assets.
3M™ Novec™ 1230 Fire Protection Fluid is a highly-efficient extinguishing agent that:
Water mist is a stand-alone system that does not require major water supply lines like sprinkler systems do.
Water Mist uses only a small fraction of the water that a typical deluge sprinkler system would use. This means that little or no water damage occurs and there is very little clean-up.
Water Mist is 100% natural, non-toxic and widely applicable.
Chemetron Water Mist
Argonite is an environmentally acceptable clean agent that offers Zero Ozone Depletion Potential (ODP) and Zero Global Warming Potential (GWP).
Argonite produces no post fire residue. Therefore, there is no damage to protected equipment and nothing to clean up.Chemetron Argonite
Nitrogen is an environmentally acceptable, people compatible fire extinguishing agent for vital facilities with a wide range
Nitrogen operates as a fire suppressant by reducing the oxygen concentration to a point at which the fire will extinguish, while remaining at a level acceptable for human exposure for a short
period of time.
Foam is environmentally safe and is engineered for specific applications.
Firetrace is flexible enough for virtually any industrial equipment, vehicles, storage compartment, control cabinet or remote installation. From CNC machines to fume hoods to bus fire suppression, Firetrace is the leader in reliable fire suppression for your critical equipment.
Firetrace systems quickly detect and suppress fire, directly at the source, quickly, efficiently and automatically, with more than 50,000 Firetrace systems in use worldwide.Firetrace Mini Systems